Instance - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
input-vlan-map (Gigabit Ethernet IQ)
Syntax input-vlan-map {
}
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
pop-pop
JUNOS Release 8.1.
For Gigabit Ethernet IQ interfaces only, define the rewrite profile to be applied to
Description
incoming frames on this logical interface.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

instance

Syntax instance vpls-instance-name;
Hierarchy Level [edit protocols oam ethernet connectivity-fault-management maintenance-domain name]
Statement introduced in JUNOS Release 9.4.
Release Information
Specify the VPLS instance of the default maintenance domain.
Description
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1182
input-vlan-map (Gigabit Ethernet IQ)
(pop | pop-pop | pop-swap | push | push-push | swap | swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
, pop-swap , push-push
Stacking a VLAN Tag on page 673
output-vlan-map (Gigabit Ethernet IQ) on page 1319
Configuring Maintenance Intermediate Points on page 706
maintenance-domain on page 1261
, swap-push , and swap-swap statements introduced in