Hold-Time; Hold-Time (Aps); Hold-Time (Physical Interface); Hold-Time (Sonet/Sdh Defect Triggers) - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

hold-time

See the following sections:
NOTE: For information about the
interface-name unit logical-unit-number family (inet | inet6) address address (vrrp-group
| vrrp-inet6-group) group-number preempt]
interface interface-name unit logical-unit-number family (inet | inet6) address address
(vrrp-group | vrrp-inet6-group) group-number preempt]
Configuration Guide.

hold-time (APS)

hold-time milliseconds;
Syntax
[edit interfaces interface-name sonet-options aps]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
Hold-time value to use to determine whether a neighbor APS router is operational.
Description
milliseconds
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1154
hold-time (APS)
hold-time (APS) on page 1154
hold-time (Physical Interface) on page 1155
hold-time (SONET/SDH Defect Triggers) on page 1156
—Hold-time value.
Range: 1 through 65,534 milliseconds
Default: 3000 milliseconds (3 times the advertisement interval)
Configuring APS Timers on page 923
advertise-interval on page 964
statement at the
hold-time
and
[edit logical-systems logical-system-name
, see the JUNOS High Availability
[edit interfaces