Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 362

JUNOS 10.1 Network Interfaces Configuration Guide
You can include these statements at the following hierarchy levels:
ATM2 IQ Physical and Logical Configuration Statement Hierarchies
To configure ATM2 IQ physical interface properties, include the
sonet-options
ATM2 IQ Physical
Configuration Hierarchy
292
ATM2 IQ Physical and Logical Configuration Statement Hierarchies
[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
statements at the
[edit interfaces at-fpc/pic/port]
atm-options {
cell-bundle-size cells;
ilmi;
linear-red-profiles profile-name{
high-plp-max-threshold percent;
low-plp-max-threshold percent;
queue-depth cells high-plp-threshold percent low-plp-threshold percent;
}
mpls {
pop-all-labels {
required-depth number;
}
}
pic-type atm2;
plp-to-clp;
promiscuous-mode {
vpi vpi-identifier;
}
scheduler-maps map-name {
forwarding-class class-name {
epd-threshold cells plp1 cells;
linear-red-profile profile-name;
priority (high | low);
transmit-weight (cells number | percent number);
}
vc-cos-mode (alternate | strict);
}
vpi vpi-identifier {
oam-liveness {
up-count;
down-count;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained
rate burst length);
}
}
}
sonet-options {
aps {
advertise-interval milliseconds;
[edit interfaces at-fpc/pic/port]
and
atm-options
hierarchy level: