Accept - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

accept

accept (dhcp-v4 | inet);
Syntax
[edit interfaces interface-name auto-configure stacked-vlan-ranges dynamic-profile
Hierarchy Level
[edit interfaces interface-name auto-configure vlan-ranges dynamic-profile profile-name]
Statement introduced in JUNOS Release 9.5.
Release Information
dhcp-v4
Specify the type of VLAN Ethernet packet accepted by an interface that is associated
Description
with a VLAN dynamic profile or stacked VLAN dynamic profile.
Options dhcp-v4
NOTE: The DHCP-specific
statement is not set to
inet
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
946
accept
profile-name],
option added in JUNOS Release 10.0.
—IPv4 DHCP packet type. Specifies that incoming IPv4 DHCP discover packets
trigger the authentication of a VLAN as it is dynamically created.
mac-address
dhcp-v4
—IPv4 Ethernet and ARP packet type.
Configuring the VLAN Ethernet Packet Type for Single-Tag VLAN Dynamic Profiles
Configuring the VLAN Ethernet Packet Type for Stacked VLAN Dynamic Profiles
and options are rejected if the accept
option-82
.