Dtr - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

dtr

dtr signal-handling-option;
Syntax
Hierarchy Level [edit interfaces interface-name serial-options dce-options],
[edit interfaces interface-name serial-options dte-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For EIA-530 and V.35 interfaces only, configure the to-DCE signal, data-transmit-ready
Description
(DTR).
Options signal-handling-option
assert
auto-synchronize
duration milliseconds
interval seconds
de-assert
normal
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1086
dtr
—Signal handling for the DTR signal. The signal handling can
be one of the following:
—The to-DCE signal must be asserted.
—Normal DTR signal with automatic synchronization. This statement
has two substatements:
—Pulse duration of resynchronization.
Range: 1 through 1000 milliseconds
Default: 1000 milliseconds
—Offset interval for resynchronization.
Range: 1 through 31 seconds
Default: 15 seconds
—The to-DCE signal must be deasserted.
—Normal DTR signal handling as defined by the TIA/EIA Standard 530.
Default: normal
Configuring the Serial Signal Handling on page 278