Configuring Channelized OC12/STM4 IQ PICs for SDH Mode
To configure a Channelized OC12 IQ PIC to operate in SDH mode, include the
sdh
This configuration creates interface
For more information, see the JUNOS System Basics Configuration Guide.
Configuring an Unpartitioned SDH (VC-4-4C) Interface on a Channelized OC12/STM4 IQ
PIC
On a Channelized OC12 IQ PIC, you can configure one SDH (VC-4-4C) interface. To
configure an SDH (VC-4-4C) interface, include the
statements at the
This configuration creates interface
Example: Configuring an Unpartitioned SDH (VC-4-4C) Interface
Configure an unpartitioned SDH (VC-4-4C) interface, using partition 1 and
OC slices 4 through 6:
This configuration creates the interface
Configuring SDH (VC-4) Interfaces on Channelized OC12/STM4 IQ PICs
To configure an SDH (VC-4) interface on a Channelized OC12 IQ PIC, include the
partition
cstm4-fpc/pic/port]
This configuration creates interface
Configuring T1 or Channelized T1 Interfaces Under Channelized T3
Interfaces on page 452
Configuring NxDS0 Interfaces on Channelized OC12/STM4 IQ PICs on page 453
statement at the
[edit chassis fpc fpc/pic/port]
[edit chassis]
fpc 0 {
pic 2 {
framing sdh;
}
}
[edit interfaces cstm4-fpc/pic/port]
[edit interfaces cstm4-fpc/pic/port]
no-partition interface-type so;
[edit interfaces cstm4-0/2/0]
no-partition interface-type so;
,
oc-slice
, and
interface-type
hierarchy level, specifying the
[edit interfaces cstm4-fpc/pic/port]
partition partition-number oc-slice oc-slice-range interface-type so;
Configuring Channelized OC12/STM4 IQ Interfaces (SDH Mode)
Chapter 19: Configuring Channelized OC12/STM4 Interfaces
hierarchy level:
.
cstm4-0/2/0
no-partition
hierarchy level:
.
so-fpc/pic/port
.
so-0/2/0
statements at the
[edit interfaces
interface type:
so
.
so-fpc/pic/port:channel
framing
and
interface-type
449