Bearer-Bandwidth-Limit - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

bearer-bandwidth-limit

bearer-bandwidth-limit kilobits-per-second;
Syntax
Hierarchy Level [edit interfaces interface-name unit logical-unit-number dynamic-call-admission-control],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced in JUNOS Release 8.2.
Release Information
(J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media
Description
gateway module) For Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI
interfaces, and serial interfaces with PPP or Frame Relay encapsulation, configure
the bearer bandwidth limit (BBL). BBL is used for dynamic call admission control
(dynamic CAC) to provide enhanced control over WAN bandwidth.
kilobits-per-second
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
998
bearer-bandwidth-limit
dynamic-call-admission-control]
—The bearer bandwidth limit to be reported to a TGM550 media
gateway module, in kilobits per second (kbps).
Range: 0 through 9999 kbps
Default: 1 (dynamic CAC is not enabled on the interface)
Configuring Dynamic Call Admission Control on page 177
JUNOS Services Interfaces Configuration Guide
JUNOS Software Interfaces and Routing Configuration Guide