Input-Policer; Input-Priority-Map - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

input-policer

input-policer policer-name;
Syntax
Hierarchy Level [edit interfaces interface-name unit logical-unit-number layer2-policer]
Statement introduced in JUNOS Release 8.2.
Release Information
Associate a Layer 2 policer with a logical interface. The
Description
input-three-color
Options policer-name
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

input-priority-map

input-priority-map {
Syntax
}
Hierarchy Level [edit interfaces interface-name gigether-options ethernet-switch-profile
Statement introduced before JUNOS Release 7.4.
Release Information
For Gigabit Ethernet IQ and 10-Gigabit Ethernet interfaces only, define the input
Description
policer priority map to be applied to incoming frames on this interface.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
statements are mutually exclusive.
—Name of the policer that you define at the
Applying a Policer on page 789
output-policer on page 1315
ieee802.1p premium [ values ];
ethernet-policer-profile]
Specifying an Input Priority Map on page 788
output-priority-map on page 1316
Chapter 62: Summary of Interface Configuration Statements
input-policer
[edit firewall]
and
hierarchy level.
1179
input-policer