Activation-Delay - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

activation-delay

activation-delay seconds;
Syntax
Hierarchy Level [edit interfaces dln unit logical-unit-number dialer-options]
Statement introduced before JUNOS Release 7.4.
Release Information
(J Series Services Routers) For ISDN interfaces, configure the ISDN dialer activation
Description
delay. Used only for dialer backup and dialer watch cases.
Options seconds
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
960
activation-delay
—Interval before the backup interface is activated after the primary interface
has gone down.
Range: 1 through 4,294,967,295 seconds
Configuring the Dialer Interface on page 887
JUNOS Software Interfaces and Routing Configuration Guide