Example: Configuring A Channelized Oc12 Iq Interface As An Unpartitioned Clear Channel - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Network interfaces configuration
Table of Contents

Advertisement

messages to the remote host if the link PIC fails. To do this, include the
no-termination-request statement at the
hierarchy level:
The
configurations and works with PPP, PPP over Frame Relay, and MLPPP interfaces
only.
For information about interchassis and intrachassis LSQ failover, see the JUNOS
Services Interfaces Configuration Guide.
Example: Configuring a Channelized OC12 IQ Interface as an Unpartitioned Clear
Channel
Configure a channelized OC12 interface as an unpartitioned, clear channel:
Configuring a
SONET/SDH Interface
Configure the following interfaces on a Channelized OC12 IQ or IQE PIC:
Configuring Multiple
Interface Types
a. An OC3 interface
b. Another OC3 interface
c.
d. A channelized OC1 converted into a T3 interface
e. A channelized OC1 partitioned into T1 interfaces and channelized T1s, which
f.
g. A channelized OC1 converted into a channelized T3, which is partitioned into
h. A channelized OC1 partitioned into channelized T1s, which are partitioned into
Configuring the Interface
Partitions
no-termination-request;
no-termination-request
[edit interfaces]
coc12-5/0/0 {
no-partition interface-type so; # so-5/0/0
}
A channelized OC1 partitioned into T1 interfaces
are partitioned into NxDS0 interfaces
A channelized OC1 converted into a channelized T3, which is partitioned into
T1 interfaces
T1 interfaces and a channelized T1, which is partitioned into NxDS0 interfaces
NxDS0 interfaces
[edit interfaces]
coc12-1/1/0 {
sonet-options {
sonet-options-statements;
}
partition 1 oc-slice 1-3 interface-type so; # (a) so-1/1/0:1
partition 2 oc-slice 4-6 interface-type so; # (b) so-1/1/0:2
partition 3 oc-slice 7 interface-type coc1; # (c) coc1-1/1/0:3
partition 4 oc-slice 8 interface-type coc1; #(d) coc1-1/1/0:5
partition 5 oc-slice 9 interface-type coc1; # (e) coc1/1/0:5

Example: Configuring a Channelized OC12 IQ Interface as an Unpartitioned Clear Channel

Chapter 19: Configuring Channelized OC12/STM4 Interfaces
[edit interfaces interface-name ppp-options]
statement is supported only with MLPPP and SONET APS
457

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos 10.1

Table of Contents