Ima-Group-Options - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

ima-group-options

ima-group-options {
Syntax
}
[edit interfaces (t1-fpc/pic/port:m:n | e1-fpc/pic/port:n | t1|e1-fpc/pic/port)]
Hierarchy Level
Statement introduced in JUNOS Release 10.0.
Release Information
Specify IMA group options.
Description
differential-delay 1 56
Options
frame-length (32 |64 |128 |256)
frame-synchronization
minimum-links 1-8
symmetry (symmetrical-config-and-operation |
test-procedure
differential-delay number;
frame-length (32 |64 |128 |256);
frame-synchronization {
alpha number;
beta number;
gamma number;
}
minimum-links number;
symmetry (symmetrical-config-and-operation |
symmetrical-config-asymmetrical-operation);
test-procedure {
ima-test-start;
ima-test-stop;
interface name;
pattern number;
period number;
}
transmit-clock (common |independent);
version (1.0 |1.1);
—Maximum differential delay among links in msec, the default
is 25.
—IMA group frame synchronization selection.
alpha 1 2 —Number of consecutive invalid ICP cells for IFSM, the default is 2.
—Number of consecutive errored ICP cells for IFSM, the default is 2.
beta 1 2
—Number of consecutive valid ICP cells for IFSM, the default is 1.
gamma 1 5
—IMA group minimum active links; the default is 1.
symmetrical-config-asymmetrical-operation)
—Specify an IMA link interface test.
Chapter 62: Summary of Interface Configuration Statements
—IMA frame length in number of cells; default is
—IMA group symmetry mode selection.
128
1165
ima-group-options
.