High-Plp-Max-Threshold - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

high-plp-max-threshold

high-plp-max-threshold percent;
Syntax
Hierarchy Level [edit interfaces at-fpc/pic/port atm-options linear-red-profiles profile-name]
Statement introduced before JUNOS Release 7.4.
Release Information
For ATM2 IQ interfaces only, define the drop profile fill-level for the high PLP CoS
Description
VC. When the fill level exceeds the defined percentage, all packets are dropped.
Options percent
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1150
high-plp-max-threshold
—Fill-level percentage when linear random early discard (RED) is applied to
cells with PLP.
Configuring ATM2 IQ VC Tunnel CoS Components on page 347
low-plp-max-threshold on page 1252
low-plp-threshold on page 1253
queue-depth on page 1374