Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1231

if-exceeding
if-exceeding {
Syntax
}
[edit firewall hierarchical-policer aggregate],
Hierarchy Level
[edit firewall hierarchical-policer premium]
Statement introduced in JUNOS Release 9.5.
Release Information
On M40e, M120, and M320 (with FFPC and SFPC) edge routers and T320, T640, and
Description
T1600 core routers with Enhanced Intelligent Queuing (IQE) PICs, to specify
bandwidth and burst limits for an aggregate level of a hierarchical policer, use the
if-exceeding
hierarchical-policer premium]
Options are described separately.
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
bandwidth-limit bandwidth;
burst-size-limit burst;
statement at the
Applying Policers on page 201
JUNOS Class of Service Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
[edit firewall hierarchical-policer aggregate]
hierarchy level.
or [edit firewall
1161
if-exceeding