Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 445

Configuration for the
Logical Interface
Verifying an ATM-over-SHDSL Interface Configuration
To verify an ATM-over-SHDSL interface configuration, you can issue the following
operational mode command:
[edit interfaces at-6/0/0/0 unit 3]
encapsulation atm-nlpid;
family inet {
vci 25;
}
user@host> show interfaces at-pim/0/port extensive
Chapter 15: Configuring ATM-over-SHDSL Interfaces
Verifying an ATM-over-SHDSL Interface Configuration
375