Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 595

}
isdn-options {
switch-type att5e;
bchannel-allocation descending;
incoming-called-number 384101;
incoming-called-number 384102;
incoming-called-number 384103;
}
}
[edit interfaces]
dl0 {
unit 0 {
dialer-options {
pool 1;
dial-string 384010;
incoming-map {
accept-all;
}
}
family inet {
filter {
dialer int-packet;
}
address 13.1.1.2/24;
}
}
}
[edit firewall]
family inet {
dialer-filter int-packet {
term term1 {
from {
destination address {
13.1.1.1/24;
}
protocol icmp;
then note;
}
}
term term2 {
then ignore;
}
}
}
Example: Configuring a Channelized T1 Interface as Primary Rate Interface
Chapter 25: Configuring Channelized E1 PRI and T1 PRI Interfaces
525