Family - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

family

family family {
Syntax
accounting {
destination-class-usage;
source-class-usage {
direction;
}
}
address address {
destination address;
}
bundle interface-name;
filter {
dialer filter-name;
input filter-name;
output filter-name;
group filter-group-number;
}
interface-mode (access | trunk);
ipsec-sa sa-name;
keep-address-and-control;
mac-validate (loose | strict);
mtu bytes;
multicast-only;
negotiate-address;
no-redirects:
policer {
arp policer-template-name;
input policer-template-name;
output policer-template-name;
}
primary;
protocols [inet iso mpls];
proxy inet-address address;
receive-options-packets;
receive-ttl-exceeded;
remote (inet-address address | mac-address address);
rpf-check <fail-filter filter-name>;
sampling {
direction;
}
service {
input {
service-set service-set-name <service-filter filter-name>;
post-service-filter filter-name;
}
output {
service-set service-set-name <service-filter filter-name>;
}
}
(translate-discard-eligible | no-translate-discard-eligible);
(translate-fecn-and-becn | no-translate-fecn-and-becn);
Chapter 62: Summary of Interface Configuration Statements
1123
family