Configuring T1 Or Channelized T1 Interfaces Under Channelized Au-4 Interfaces; Channelized Au-4 Interfaces; Configuring T1 Or Channelized T1 Interfaces Under Channelized T3 Interfaces - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

Configuring T1 or Channelized T1 Interfaces Under Channelized AU-4 Interfaces

To configure T1 or channelized T1 interfaces under channelized AU-4 interfaces,
include the
cau4-fpc/pic/port]
This configuration creates the interfaces
ct1-fpc/pic/port:channel
NOTE: Class-of-service (CoS) rules cannot be applied to an individual channel
configured on channelized IQ interfaces. You can only apply CoS rules to the aggregate
bit streams.
Example: Configuring T1 or Channelized T1 Interfaces Under Channelized
AU-4 Interfaces
Configure T1 and channelized T1 interfaces, using partition 1 and partition 2:

Configuring T1 or Channelized T1 Interfaces Under Channelized T3 Interfaces

To configure T1 or channelized T1 interfaces under channelized T3 interfaces, include
the
hierarchy level, specifying the
452
Configuring Channelized OC12/STM4 IQ Interfaces (SDH Mode)
[edit interfaces]
cau4-0/2/0:1 {
partition 1 interface-type t3;
}
cau4-0/2/0:1 {
partition 2 interface-type ct3;
}
t3-0/2/0:1:1 ct3-0/2/0:1:2;
partition and interface-type
hierarchy level, specifying the
[edit interfaces]
cau4-fpc/pic/port {
partition partition-number interface-type t1;
}
cau4-fpc/pic/port {
partition partition-number interface-type ct1;
}
.
[edit interfaces]
cau4-0/2/0:1 {
partition 1 interface-type t1;
}
cau4-0/2/0:1 {
partition 2 interface-type ct1;
}
t1-0/2/0:1:1 ct1-0/2/0:1:2;
partition and interface-type
[edit interfaces]
statements at the
or
t1 ct1
t1-fpc/pic/port:channel
statements at the [edit interfaces ct3-fpc/pic/port]
or interface type:
t1 ct1
[edit interfaces
interface type:
and