Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1188

JUNOS 10.1 Network Interfaces Configuration Guide
evcs
evcs evc-id {
Syntax
}
[edit protocols oam ethernet]
Hierarchy Level
Statement introduced in JUNOS Release 9.5.
Release Information
On MX Series routers with
Description
connection.
evc-protocol cfm | vpls
Options
management-domain domain-id
management-association association-id
routing-instance instance-id
remote-uni-count count
multipoint-to-multipoint
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1118
evcs
evc-protocol cfm management-domain domain-id (
| vpls (routing-instance instance-id);
association-id>
remote-uni-count count;
multipoint-to-multipoint;
ge
—Specify connectivity fault management (CFM) or virtual private
LAN service (VPLS) as the Ethernet Virtual Connection (EVC) protocol.
domain.
management association.
—(Optional) For VPLS, specify the VPLS routing instance.
—(Optional) Specify the number of remote UNIs in the EVC
configuration, the default is 1.
—(Optional) Specify multiple points in the EVC configuration,
the default is point-to-point if
Configuring Ethernet Local Management Interface on page 715
lmi (Ethernet OAM) on page 1235
<management-association
, , or interfaces, configure an OAM Ethernet virtual
xe ae
—(Optional) For CFM, specify the CFM management
—(Optional) For CFM, specify the CFM
remote-uni-count is 1.