Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 934

JUNOS 10.1 Network Interfaces Configuration Guide
Clear
Clear
user@node1> show protection-group ethernet-ring node-state
Ethernet ring
pg101
Restore Timer
disabled
user@node1> show protection-group ethernet-ring statistics group-name pg101
Ethernet Ring statistics for PG pg101
RAPS sent
RAPS received
Local SF happened:
Remote SF happened:
NR event happened:
NR-RB event happened:
For Node 2 and Node 3, the outputs should be the same:
Failure Situation—Other
Nodes
user@node2> show protection-group ethernet-ring aps
Ethernet Ring Name
pg102
Originator
Yes
user@node2> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg102
Interface
ge-1/2/1
ge-1/0/2
Signal Failure
Clear
set
user@node2> show protection-group ethernet-ring node-state
Ethernet ring
pg102
Restore Timer
disabled
user@node2> show protection-group ethernet-ring statistics group-name pg102
Ethernet Ring statistics for PG pg101
RAPS sent
RAPS received
Local SF happened:
Remote SF happened:
NR event happened:
NR-RB event happened:
Related Topics
864
Configuring Node 3
IFF ready
IFF ready
APS State
protected
Quard Timer
disabled
Request/state
SF
Remote Node ID
00:00:00:00:00:00
Control Channel
ge-1/2/1.1
ge-1/0/2.1
Admin State
IFF ready
IFF ready
APS State
idle
Quard Timer
disabled
Ethernet Ring Protection Switching Overview on page 851
Event Ring Protection Link Owner
SF Yes
Operation state
operational
: 1
: 1
: 0
: 1
: 0
: 1
No Flush Ring Protection Link Blocked
No No
Forward State Ring Protection Link End
forwarding No
discarding No
Event Ring Protection Link Owner
NR-RB No
Operation state
operational
: 1
: 1
: 1
: 0
: 0
: 1