Aggregate-Ports - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
aggregate (SONET/SDH)
Syntax aggregate asx;
Hierarchy Level [edit interfaces interface-name sonet-options]
Statement introduced before JUNOS Release 7.4.
Release Information
Specify aggregated SONET/SDH logical interface number.
Description
Options asx
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

aggregate-ports

Syntax aggregate-ports;
Hierarchy Level [edit chassis fpc slot-number pic pic-number]
Statement introduced in JUNOS Release 8.1.
Release Information
For T Series routers only, specify OC768-over-OC192 mode on the 4-port OC192C
Description
PIC. Four OC192 links are aggregated into one OC768 link with one logical interface.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
968
aggregate (SONET/SDH)
—Aggregated SONET/SDH logical interface number.
Range: 0 through 15
Configuring Aggregated SONET/SDH Interfaces on page 936
Specifying OC768-over-OC192 Mode on page 107