Down-Count - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

down-count

down-count cells;
Syntax
Hierarchy Level [edit interfaces interface-name atm-options vpi vpi-identifier oam-liveness],
[edit interfaces interface-name unit logical-unit-number oam-liveness],
[edit interfaces interface-name unit logical-unit-number family family address address
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced before JUNOS Release 7.4.
Release Information
For ATM encapsulation only, configure Operation, Administration, and Maintenance
Description
(OAM) F5 loopback cell count thresholds. This feature is not supported on
ATM-over-SHDSL interfaces.
For ATM2 IQ PICs only, configure OAM F4 loopback cell count thresholds at the
interfaces interface-name atm-options vpi vpi-identifier]
Options cells
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
multipoint-destination address oam-liveness],
oam-liveness],
family family address address multipoint-destination address oam-liveness]
—Minimum number of consecutive OAM F4 or F5 loopback cells lost before a
VC is declared down.
Range: 1 through 255
Default: 5 cells
Configuring the ATM OAM F5 Loopback Cell Threshold on page 337
Chapter 62: Summary of Interface Configuration Statements
hierarchy level.
[edit
1079
down-count