E1-Options - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

e1-options

e1-options {
Syntax
}
Hierarchy Level [edit interfaces interface-name]
Statement introduced before JUNOS Release 7.4.
Release Information
Configure E1-specific physical interface properties.
Description
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1092
e1-options
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
fcs (16 | 32);
framing (g704 | g704-no-crc4 | unframed);
idle-cycle-flag (flags | ones);
invert-data;
loopback (local | remote);
start-end-flag (filler | shared);
timeslots time-slot-range;
Channelized E1 IQ and IQE Interfaces Overview on page 511
Channelized STM1 Interfaces Overview on page 473
E1 Interfaces Overview on page 561
T1 Interfaces Overview on page 577