Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1059

auto-negotiation (Gigabit Ethernet)
Syntax (auto-negotiation | no-auto-negotiation) remote-fault <local-interface-online |
Hierarchy Level [edit interfaces interface-name gigether-options]
Statement introduced in JUNOS Release 7.6.
Release Information
For Gigabit Ethernet interfaces only, explicitly enable autonegotiation and remote
Description
fault. In this mode, you can manually configure remote fault options. Include the
no-auto-negotiation
Tri-Rate Ethernet copper interface to operate at 1 Gbps, autonegotiation must be
enabled.
Autonegotiation is automatically enabled. No explicit action is taken after the
Default
autonegotiation is complete or if the negotiation fails.
Options no-auto-negotiation
remote-fault local-interface-online | local-interface-offline
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
local-interface-offline>;
statement to disable autonegotiation. When you configure the
—Disables explicit autonegotiation.
remote fault on an interface. Specify remote fault as
Default:
online
Gigabit Ethernet Autonegotiation Overview on page 797
Chapter 62: Summary of Interface Configuration Statements
—(Optional) Manually configure
online
auto-negotiation (Gigabit Ethernet)
or .
offline
989