Ethernet-Policer-Profile - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

ethernet-policer-profile

ethernet-policer-profile {
Syntax
}
[edit interfaces interface-name gigether-options ethernet-switch-profile],
Hierarchy Level
[edit interfaces interface-name aggregated-ether-options ethernet-switch-profile]
Statement introduced before JUNOS Release 7.4.
Release Information
For Gigabit Ethernet IQ, 10-Gigabit Ethernet, and Gigabit Ethernet PICs with SFPs
Description
(except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the
M7i router), configure a class of service (CoS)-based policer. Policing applies to the
inner VLAN identifiers, not to the outer tag. For Gigabit Ethernet interfaces with SFPs
(except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the
M7i router), the
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
policer is not supported.
premium
Configuring Gigabit Ethernet Policers on page 787
Chapter 62: Summary of Interface Configuration Statements
ethernet-policer-profile
1113