Agent-Specifier - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

agent-specifier

agent-specifier aci circuit-id-string ari remote-id-string;
Syntax
Hierarchy Level [edit protocols pppoe service-name-tables table-name service service-name]
Statement introduced in JUNOS Release 10.0.
Release Information
Specify the action taken by the interface for the specified agent circuit identifier
Description
(ACI)/agent remote identifier (ARI) pair when the interface receives a PADI control
packet that includes the vendor-specific tag with ACI/ARI pair information. A
maximum of 16 ACI/ARI pairs is supported per service name tag.
You can use an asterisk (*) as a wildcard character to match ACI/ARI pairs, the ACI
alone, or the ARI alone. The asterisk can be placed only at the beginning, the end,
or both the beginning and end of the identifier string. You can also specify an asterisk
alone for either the ACI or the ARI. You cannot specify only an asterisk for both the
ACI and the ARI. When you specify a single asterisk as the identifier, that identifier
is ignored in the PADI packet.
For example, suppose you care about matching only the ACI and do not care what
value the ARI has in the PADI packet, or even whether the packet contains an ARI
value. In this case you can set the
interface ignores the ARI received in the packet and the interface takes action based
only on matching the specified ACI.
The default action is terminate.
Default
Options circuit-id-string
remote-id-string
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—Identifier for the agent circuit ID that corresponds to the DSLAM
interface that initiated the service request. This is a string of up to 63 characters.
—Identifier for the subscriber associated with the DSLAM interface
that initiated the service request. This is a string of up to 63 characters.
Configuring PPPoE Service Name Tables on page 837
Assigning an ACI/ARI Pair to a Service Name and Configuring the Action Taken
When the Client Request Includes ACI/ARI Information on page 840
Chapter 62: Summary of Interface Configuration Statements
to a single asterisk. Then the
remote-id-string
965
agent-specifier