Accept-Source-Mac - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

accept-source-mac

accept-source-mac {
Syntax
}
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
For Gigabit Ethernet intelligent queuing (IQ) interfaces only, accept traffic from and
Description
to the specified remote media access control (MAC) address.
The
which is valid for aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces
only.
On untagged Gigabit Ethernet interfaces you should not configure the
source-address-filter
On tagged Gigabit Ethernet interfaces you should not configure the
statement and the
specified in both filters.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
mac-address mac-address {
policer {
input cos-policer-name;
output cos-policer-name;
}
}
statement is equivalent to the
accept-source-mac
statement and the
accept-source-mac
Configuring MAC Address Filtering on page 791
source-filtering on page 1435
Chapter 62: Summary of Interface Configuration Statements
source-address-filter
accept-source-mac statement simultaneously.
statement with an identical MAC address
accept-source-mac
statement,
source-address-filter
947