Table of Contents
Advertisement
JUNOS 10.1 Network Interfaces Configuration Guide
Configuring ISDN Services Physical and Logical Interface Properties
To configure ISDN services physical interface properties, include the
statement at the
To configure ISDN services logical interface properties, include the following
statements:
To configure a primary interface to use an ISDN logical interface as a backup or
"failover" interface when the primary connection experiences interruptions in Internet
connectivity, include the
the
872
Configuring ISDN Services Physical and Logical Interface Properties
[edit interfaces br-pim/0/port]
[edit interfaces br-pim/0/port]
isdn-options {
calling-number number;
incoming-called-number number <reject>;
spid1 spid-string;
spid2 spid-string;
static-tei-val value;
switch-type (att5e | etsi | ni1 | ntdms100 | ntt);
t310 seconds;
tei-option (first-call | power-up);
}
dialer-options {
pool pool-name <priority priority>;
}
[edit interfaces dln unit logical-unit-number]
dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string dial-string-numbers;
idle-timeout seconds;
incoming-map {
caller (caller-id| accept-all);
initial-route-check seconds;
load-interval seconds;
load-threshold percent;
pool pool-name;
redial-delay time;
watch-list {
[ routes ];
}
}
encapsulation [
(cisco-hdlc | multilink-ppp | ppp);
}
}
backup-options
[edit interfaces interface-name unit logical-unit-number]
[edit interfaces interface-name unit logical-unit-number]
hierarchy level:
statement to specify the ISDN interface at
hierarchy level:
isdn-options
Advertisement
Table of Contents
