Current - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

current

current margin;
Syntax
Hierarchy Level [edit interfaces interface-name shdsl-options snr-margin],
[edit logical-systems logical-system-name interfaces interface-name shdsl-options
Statement introduced in JUNOS Release 7.4.
Release Information
For J Series Services Routers only, configure the current target signal-to-noise ratio
Description
(SNR) margin to be used when training the SHDSL line. The current margin is the
difference between desired SNR and the actual SNR. When configured, the line trains
at higher than the current margin plus SNR threshold.
margin
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1046
current
snr-margin]
—Desired current SNR margin. Specify either
through 10 dB.
Default: 0 dB
ATM-over-SHDSL Overview on page 369
disabled or a value from 0 dB