Dynamic-Call-Admission-Control - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

dynamic-call-admission-control

dynamic-call-admission-control {
Syntax
}
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced in JUNOS Release 8.2.
Release Information
(J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media
Description
gateway module) For Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI
interfaces, and serial interfaces with PPP or Frame Relay encapsulation, configure
dynamic call admission control (CAC). Dynamic CAC provides enhanced control over
WAN bandwidth. When dynamic CAC is configured on an interface responsible for
providing call bandwidth, the TGM550 informs the Media Gateway Controller (MGC)
of the bandwidth limit available for voice packets on the interface and requests the
MGC to block new calls when the bandwidth is exhausted.
Dynamic CAC must be configured on each Services Router interface responsible for
providing call bandwidth.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
Configuring Dynamic Call Admission Control on page 177
JUNOS Services Interfaces Configuration Guide
JUNOS Software Interfaces and Routing Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
dynamic-call-admission-control
1089