JUNOS 10.1 Network Interfaces Configuration Guide
allow-remote-loopback
allow-remote-loopback;
Syntax
[edit protocols oam link-fault-management interface interface-name negotiation-options]
Hierarchy Level
Statement introduced in JUNOS Release 8.4.
Release Information
Enable the remote loopback on IQ2 and IQ2-E Gigabit Ethernet interfaces, and all
Description
Ethernet interfaces on the MX Series routers.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
974
allow-remote-loopback
Enabling Remote Loopback Support on the Local Interface on page 781