Initial-Route-Check - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

initial-route-check

initial-route-check seconds;
Syntax
Hierarchy Level [edit interfaces dln unit logical-unit-number dialer-options]
Statement introduced before JUNOS Release 7.4.
Release Information
On J Series Services Routers with ISDN interfaces, allows the router to check whether
Description
the primary route is up after the initial startup of the router is complete and the timer
expires.
Options seconds
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—How long to wait to check if the primary interface is up after the router
comes up.
Range: 1 through 300 seconds
Default: 120 seconds
ISDN Interfaces Overview on page 871
JUNOS Software Interfaces and Routing Configuration Guide
Chapter 62: Summary of Interface Configuration Statements
initial-route-check
1173