Table 84: Type 2 Pic Mode Combinations - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

Table 84: Type 2 PIC Mode Combinations

PIC Mode
1-port OC48 1xOC48 concatenated
1xOC48 nonconcatenated
1xOC12 concatenated
1xOC12 nonconcatenated
1xOC3 concatenated
4-port OC12 1xOC48 concatenated
1xOC48 nonconcatenated
1xOC12 nonconcatenated
4xOC12 concatenated
4-port OC3 1xOC12 concatenated
1xOC12 nonconcatenated
4xOC3 concatenated
By default, SONET/SDH PICs operate in concatenated mode. To specify interface
speed in concatenated mode, include the
interfaces so-fpc
For example, each port of 4-port OC12 PIC can be configured to be in OC3 or OC12
speed independently when this PIC is in 4xOC12 concatenated mode.
To specify interface speed in nonconcatenated mode, include the
at the
To configure the PIC to operate in channelized (multiplexed) mode, include the
no-concatenate
level.
For more information about using the
System Basics Configuration Guide.
900
Configuring SONET/SDH Physical Interface Properties
Speed Configuration
fpc/pic/0 speed oc48
fpc/pic/0:0 speed oc12
fpc/pic/0 speed oc12
fpc/pic/0 0 speed oc3
fpc/pic/0 speed oc3
fpc/pic/0 speed oc48
fpc/pic/0:0 speed
fpc/pic/0 speed oc3
fpc/pic/port speed oc3|oc12
fpc/pic/0 speed oc12
fpc/pic/0:0 speed oc3
fpc/pic/port speed oc3
/ / hierarchy level:
pic port]
[edit interfaces so-fpc/pic/port
speed (oc3 | oc12 | oc48);
[edit interfaces so-fpc/pic/port.channel]
[edit interfaces so-fpc/pic/port.channel]
speed (oc3 | oc12);
statement at the
Default Mode
Concatenated
Nonconcatenated
Nonconcatenated
Concatenated
Nonconcatenated
Concatenated
speed statement with options at the
hierarchy level:
[edit chassis fpc slot-number pic pic-number]
non-concatenate statement, see the JUNOS
[edit
speed statement
hierarchy