Example: Configuring Fractional E1 Iq And Iqe Interfaces; Configuring Nxds0 Iq And Iqe Interfaces - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide
Configuring Fractional E1 IQ and IQE Interfaces
By default, all the time slots on a channelized E1 interface are used. To configure a
fractional E1 interface on a Channelized E1 IQ PIC, perform the following tasks:
1.
2.
NxDS0 time slots configured on either a channelized STM1 IQ or IQE interface or a
channelized E1 IQ or IQE interface are numbered from 1 to 31 (0 is reserved), while
fractional E1 time slots are numbered from 2 to 32 (1 is reserved).
To configure ranges, use hyphens. To configure discontinuous time slots, use commas.
Do not include spaces.
For more information about E1 time slots, see "Configuring Fractional E1 Time Slots"
on page 566.

Example: Configuring Fractional E1 IQ and IQE Interfaces

Configure a fractional E1 interface that uses time slots 2 through 10:
For a full configuration example, see the JUNOS Feature Guide.

Configuring NxDS0 IQ and IQE Interfaces

By default, all the time slots on a channelized E1 interface are used. To configure an
NxDS0 IQ interface on a Channelized E1 IQ or IQE PIC, you must configure the
number of time slots allocated to the NxDS0 IQ or IQE interface by including the
partition
hierarchy level, specifying the
512
Configuring Channelized E1 IQ and IQE Interfaces
Include the statement at the
no-partition
level:
[edit interfaces ce1-fpc/pic/port]
no-partition interface-type e1;
This configuration creates interface
Configure the number of time slots allocated to the E1 IQ or IQE interface by
including the timeslots statement at the
hierarchy level:
[edit interfaces e1-fpc/pic/port e1-options]
timeslots time-slot-range;
[edit interfaces ce1-0/0/0]
no-partition interface-type e1;
[edit interfaces e1-0/0/0 e1-options]
timeslots 2-10;
, , and
timeslots interface-type
[edit interfaces ce1-fpc/pic/port]
partition partition-number timeslots time-slot-range interface-type ds;
[edit interfaces ce1-fpc/pic/port]
.
e1-fpc/pic/port
[edit interfaces e1-fpc/pic/port e1-options]
statements at the
[edit interfaces ce1-fpc/pic/port]
interface type:
ds
hierarchy