Channelized Oc48/Stm16 Iqe Interfaces Overview; Figure 34: Sample Channelization Of Oc48/Stm16 Iqe Pic - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Chapter 18
Configuring Channelized OC48/STM16
IQE Interfaces

Channelized OC48/STM16 IQE Interfaces Overview

Channelized OC48/STM16 IQE Interfaces Overview on page 413
Configuring Channelized OC48/STM16 IQE Interfaces in SONET Mode on page 415
Configuring Channelized OC48/STM16 IQE Interfaces (SDH Mode) on page 423
Configuring Link PIC Failover on Channelized OC48/STM16 IQE
Interfaces on page 428
Example: Configuring Channelized OC48 Interfaces with Partitioned
Channels on page 429
Channelized enhanced intelligent queuing (IQE) interfaces allow arbitrary and dynamic
channelization of serial links, allowing greater flexibility than the channelized
interfaces. Figure 34 on page 413, Figure 35 on page 414, and Figure 36 on page 415
illustrate the Channelized OC48/STM16 IQE Physical Interface Cards (PICs) in several
examples of many possible configurations.
Figure 34: Sample Channelization of OC48/STM16 IQE PIC (SONET Mode)
OC-12
In the example in Figure 34 on page 413, a Channelized OC48/STM16 IQE PIC
operating in SONET mode is partitioned into the following OC slices:
a. A clear channel OC12 interface.
b. An OC3 interface.
OC48
(i)
Channelized OC48/STM16 IQE Interfaces Overview
413