East-Interface - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

east-interface

east-interface {
Syntax
}
[edit protocols protection-group ethernet-ring ring-name]
Hierarchy Level
Statement introduced in JUNOS Release 9.4.
Release Information
For Ethernet ring protection, each ring should have two interface ports: an
Description
east-interface
NOTE: Always configure the
The interface must use the control channel's logical interface name. The control
channel is a dedicated VLAN channel for the ring port.
ring-protection-link-end
Options
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1094
east-interface
control-channel channel-name {
vlan number;
}
and a west-interface
—If this port is one side of the RPL, this flag should be set.
Ethernet Ring Protection Switching Overview on page 851
west-interface on page 1544
.
east-interface first, before configuring the west-interface .