Table of Contents
Advertisement
To configure aggregated SONET/SDH interfaces, assign a number for the aggregated
SONET/SDH interface
The following example shows an aggregated SONET/SDH configuration:
You also need to specify the constituent physical interfaces by including the
statement at the
more information, see "Configuring SONET/SDH Link Aggregation" on page 937. You
can optionally specify other physical properties that apply specifically to the
aggregated SONET/SDH interfaces; for details, see "Configuring SONET/SDH Physical
Interface Properties" on page 896. For a sample configuration, see "Example:
Configuring Aggregated SONET/SDH Interfaces" on page 940.
To remove the configuration statements related to
SONET/SDH interface to down state, delete the interface from the configuration:
However, the aggregated SONET/SDH interface is not deleted until you delete the
chassis aggregated-devices sonet device-count
You can configure the following aggregated SONET/SDH properties:
Configuring SONET/SDH Link Aggregation
On SONET/SDH interfaces, you can associate a physical interface with an aggregated
SONET/SDH interface. To associate the interface with an aggregated SONET/SDH
at the
asx
[edit interfaces]
asx {
...
}
[edit interfaces]
as0 {
aggregated-sonet-options {
minimum-links 1;
link-speed oc3;
}
unit 0 {
family inet {
address 10.2.11.1/30;
}
}
}
[edit interfaces interface-name sonet-options]
[edit]
user@host# delete interfaces asx
Configuring SONET/SDH Link Aggregation on page 937
Configuring Aggregated SONET/SDH Link Speed on page 938
Configuring Aggregated SONET/SDH Minimum Links on page 938
Configuring Filters or Sampling on Aggregated SONET/SDH Links on page 939
Example: Configuring Aggregated SONET/SDH Interfaces on page 940
Chapter 61: Configuring SONET/SDH Interfaces
hierarchy level:
[edit interfaces]
and set the aggregated
asx
configuration statement.
Configuring Aggregated SONET/SDH Interfaces
aggregate
hierarchy level; for
937
Advertisement
Table of Contents
