Configuring The Remote Imv Server (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation

Configuring the Remote IMV Server (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
remediation is triggered each time Host Checker detects that an endpoint is not
compliant.
Click the OK button to save the changes.
13.
Click the Remediation tab on the main Host Checker Policy page, and then select the
14.
Send reason strings option to display remediation information to users.
Specifying Customized Requirements Using Custom Rules (NSM Procedure) on page 161
Configuring the Remote IMV Server (NSM Procedure) on page 167
Configuring Infranet Controller Host Checker Access Restrictions (NSM Procedure) on
page 67
The server-side components of Trusted Network Computing (TNC) are: the TNC-server
(TNCS) and the integrity measurement verifiers (IMVs). You can configure the remote
IMV server to communicate with the Infranet Controller.
To configure a remote IMV server to communicate with the Infranet Controller:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure the remote IMV server.
Click the Configuration tab. In the configuration tree, select Authentication > Endpoint
3.
Security > Host Checker.
Add or modify settings as specified in Table 52 on page 167.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 52: IMV Server Configuration Details
Option
Remote IMV > Remote IMV Servers
Name
Description
Host
Chapter 15: Configuring Host Checker Policies
Function Your Action
Specifies a name for the Enter a name for the remote IMV
remote IMV server. server.
Describes the server. Enter a brief description about the
server.
Specifies the host. Enter either the IP address or
hostname as defined in the server
certificate.
167