Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 1257

interface (OAM Link-Fault Management)
Syntax interface interface-name {
}
[edit protocols oam ethernet link-fault-management]
Hierarchy Level
Statement introduced in JUNOS Release 8.2.
Release Information
For Ethernet interfaces on M320, MX Series, and T Series routers, configure IEEE
Description
802.3ah Operation, Administration, and Management (OAM) support.
interface interface-name
Options
The remaining statements are described separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
apply-action-profile profile-name;
link-discovery (active | passive);
pdu-interval interval;
pdu-threshold threshold-value;
remote-loopback;
event-thresholds {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
negotiation-options {
allow-remote-loopback;
no-allow-link-events;
}
—Interface to be enabled for IEEE 802.3ah link fault
management OAM support.
Range: 1 through 10 interfaces can be tracked.
Enabling IEEE 802.3ah OAM Support on page 776
Chapter 62: Summary of Interface Configuration Statements
interface (OAM Link-Fault Management)
1187