input-vlan-map
See the following sections:
input-vlan-map (Aggregated Ethernet)
input-vlan-map {
Syntax
}
[edit interfaces interface-name unit logical-unit-number],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced in JUNOS Release 8.2.
Release Information
For aggregated Ethernet interfaces using Gigabit Ethernet IQ and 10-Gigabit Ethernet
Description
IQ2 and IQ2-E interfaces only, define the rewrite profile to be applied to incoming
frames on this logical interface.
The statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
input-vlan-map (Aggregated Ethernet) on page 1181
input-vlan-map (Gigabit Ethernet IQ) on page 1182
(pop | push | swap);
tag-protocol-id tpid;
vlan-id number;
Stacking a VLAN Tag on page 673
output-vlan-map (Aggregated Ethernet) on page 1318
Chapter 62: Summary of Interface Configuration Statements
input-vlan-map (Aggregated Ethernet)
1181