Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 529

partition 4 interface-type ct1; # ct1-1/1/0:5:4
}
t1-1/1/0:5:1 {
description "(e) OC-slice 9 of coc12-1/1/0. T1 interface configuration.";
t1-options {
t1-options-statements;
}
}
...
ct1-1/1/0:5:4 {
description "(e) OC-slice 9 of coc12-1/1/0. CT1 to NxDSOs.;
t1-options {
t1-options-statements;
}
partition 1 timeslots 0 - 10 interface-type ds0; # ds-1/1/0:5:4:1
partition 2 timeslots 11- 23 interface-type ds0; # ds-1/1/0:5:4:2
...
}
coc1-1/1/0:6 {
(f)
description "(f) OC-slice 10 of coc12-1/1/0. COC12 to COC1 converted to a CT3
to T1s.";
sonet-options {
sonet-options-statements;
}
no-partition interface-type ct3; # ct3-1/1/0:6
}
ct3-1/1/0:6 {
description "(f) COC12 to CT3 M-13 and C-bit parity-mapped to T1s.;
sonet-options {
sonet-options-statements;
}
partition 1 - 10 interface-type t1; # t1-1/1/0:6:[1-10]
}
t1-1/1/0:6:1 {
description "(f) T1 interface configuration.";
t1-options {
t1-options-statements;
}
}
...
coc1-1/1/0:7 {
(g)
description "(g) OC-slice 11 of coc12-1/1/0. COC12 to COC1 converted to a CT3
to T1s and CT1 to NxDS0s.";
sonet-options {
sonet-options-statements;
}
no-partition interface-type ct3; # ct3-1/1/0:7
}
ct3-1/1/0:7 {
description "(g) COC12 to CT3 M-13 and C-bit parity-mapped to T1s and CT1.";
sonet-options {
sonet-options-statements;
Example: Configuring a Channelized OC12 IQ Interface as an Unpartitioned Clear Channel
Chapter 19: Configuring Channelized OC12/STM4 Interfaces
459