Interface-Status-Tlv - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

interface-status-tlv

interface-status-tlv [ down lower-layer-down ];
Syntax
[edit protocols oam ethernet connectivity-fault-management action-profile profile-name
Hierarchy Level
Statement introduced in JUNOS Release 9.6.
Release Information
Defines an
Description
of
interface-down can be taken using action-profile options.
down
Options
lower-layer-down
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
event]
action-profile consisting of various events and the action. Based on values
in the received CCM packets, specific action such as
interface-status-tlv
—When the incoming CCM packet contains interface status TLV with value
down, the action will be triggered for this action-profile.
—When the incoming CCM packet contains interface status TLV with
value lower-layer-down, the action will be triggered for this action-profile.
Configuring Remote MEP Action Profile Support on page 732
Chapter 62: Summary of Interface Configuration Statements
interface-status-tlv
1195