General-Purpose I/Os (Gpio); Gpio Introduction; Gpio Main Features; Gpio Functional Description - ST STM32F40 Series Reference Manual

General-purpose I/Os (GPIO)

7 General-purpose I/Os (GPIO)
This section applies to the whole STM32F4xx family, unless otherwise specified.
7.1

GPIO introduction

Each general-purpose I/O port has four 32-bit configuration registers (GPIOx_MODER,
GPIOx_OTYPER, GPIOx_OSPEEDR and GPIOx_PUPDR), two 32-bit data registers
(GPIOx_IDR and GPIOx_ODR), a 32-bit set/reset register (GPIOx_BSRR), a 32-bit locking
register (GPIOx_LCKR) and two 32-bit alternate function selection register (GPIOx_AFRH
and GPIOx_AFRL).
7.2

GPIO main features

●
Up to 16 I/Os under control
● Output states: push-pull or open drain + pull-up/down
●
Output data from output data register (GPIOx_ODR) or peripheral (alternate function
output)
●
Speed selection for each I/O
●
Input states: floating, pull-up/down, analog
●
Input data to input data register (GPIOx_IDR) or peripheral (alternate function input)
●
Bit set and reset register (GPIOx_BSRR) for bitwise write access to GPIOx_ODR
●
Locking mechanism (GPIOx_LCKR) provided to freeze the I/O configuration
●
Analog function
●
Alternate function input/output selection registers (at most 16 AFs per I/O)
●
Fast toggle capable of changing every two clock cycles
●
Highly flexible pin multiplexing allows the use of I/O pins as GPIOs or as one of several
peripheral functions
7.3

GPIO functional description

Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
port bit of the general-purpose I/O (GPIO) ports can be individually configured by software
in several modes:
● Input floating
●
Input pull-up
● Input-pull-down
●
Analog
● Output open-drain with pull-up or pull-down capability
●
Output push-pull with pull-up or pull-down capability
● Alternate function push-pull with pull-up or pull-down capability
●
Alternate function open-drain with pull-up or pull-down capability
185/1422 Doc ID 018909 Rev 4
RM0090