Timer Synchronization (Tim9/12); Debug Mode - ST STM32F40 Series Reference Manual

Hide thumbs Also See for STM32F40 Series:

Table of Contents

General-purpose timers (TIM9 to TIM14)

Timer synchronization (TIM9/12)

The TIM timers are linked together internally for timer synchronization or chaining. Refer to

Section 15.3.15: Timer synchronization on page 453

When the microcontroller enters debug mode (Cortex™-M4F core halted), the TIMx counter

either continues to work normally or stops, depending on DBG_TIMx_STOP configuration

bit in DBG module. For more details, refer to

watchdog, bxCAN and

Doc ID 018909 Rev 4

for details.

Section 33.16.2: Debug support for timers,

Do you have a question about the STM32F40 Series and is the answer not in the manual?