Transparent Surfaces; Wet, Smooth Or High-Gloss Surfaces; Illumination - Leica DISTO classic User Manual

For reasons of safety and optics, never
measure against a clear liquid (e.g. water) or
clean glass (not dusty).
For materials and liquids unfamiliar to you
always take a trial measurement.
1.If aiming at an angle, the laser beam is
reflected. The DISTO may receive a signal
that is too weak (error message E 255).
2.If aiming at a right angle, the DISTO may
receive a signal that is too strong (error
message E 256).
light), it will illuminate for more than 15
minutes! Without consuming any power!
Thanks to
fluorescence, you
can also see your
result in the dark. If
the display is placed
under a light source
(daylight, artificial
35