Area And Stockpile Volumes - Leica Builder Series User Manual

10.6
Description
Builder, Application Programs, for Builder 200 or higher

Area and Stockpile Volumes

The application program Area with methods 'plane' and 'tilt' is used to compute area
size of areas with max. 50 boundary points connected by straights. Furthermore a
volume with constant height can be calculated.
The calculated area is projected onto the horizontal plane or projected onto the tilted
reference plane depending on the chosen method. The tilted reference plane is com-
puted and updated automatically after each measurement. It is determined out of all
current boundary points by those three points that stretch the largest area.
Stockpile Volumes is an application for volume calculations without a plane or tilted
area. For the calculations two boundaries have to be measured. The first one is the
outer boundary, the second one is the inner boundary. Both boundaries must not
cross each other for a proper calculation.
119