1St Shift Clutch Removal; Mainshaft Disassembly; Shift Clutch/Mainshaft Icountershaft - Honda MUV700 big red Service Manual

SHIFT CLUTCH/MAINSHAFTI
COUNTERSHAFT
Be
careful nOl to
damage the
mamshah threads
1st SHIFT CLUTCH REMOVAL
Remove the torque converter (page 14·42).
Unstake the lock nut.
Loosen the lock nut while holding the driven gear
boss with an open end wrench (width across flals:
29mm).
Remove the following:
- lock nut
- washer
- lsI shift clutch assembly
- washer
- Ml
gear guide
- a-rings
Remove the primary driven gear by prying it.
Remove the O-rings from the primary driven gear.
MAINSHAFT DISASSEMBLY
Remove the mainshaft (page 13-7).
Remove the following:
- Ml
gear
- needle bearing
- washer
- M3
gear
- snap rings
- M2 gear
DRIVETRAIN SYSTEM
DRI'VEN GEAR
M3 GEAR SNAP RINGS
M2 GEAR Ml NEEDLE BE',R"'G
14-47