AR-4
BODY PANEL SEALING AREAS
HINT:
1.
Prior to applying body sealer, clean the area with a rag soaked in a grease, wax and silicone remover.
2.
If weld-through primer was used, first wipe off any excess and coat with anti-corrosion primer before applying body seal-
er.
3.
Wipe off excess body sealer with a rag soaked in a grease, wax and silicone remover.
4.
If body sealer is damaged by peeling, cracks, etc., be sure to repair as necessary.
ALL
Flat Surfacing
Flat Surfacing
ANTI-RUST TREATMENT - Body Panel Sealing Areas
Flat Surfacing
Flat
Surfacing