Toyota Tundra 2005 Service - Repair - Maintenance page 2040

Hide thumbs Also See for Tundra 2005:

Table of Contents

COOLING (1GR−FE)

ON−VEHICLE CLEANING

INSPECT FINS FOR BLOCKAGE

If fins are clogged, wash them with water or a steam cleaner and

dry with compressed air.

If the distance between the steam cleaner and the

core is too close, there is a possibility of damaging

the fin, so keep the following injection distance.

Injection Pressure

2,942 to 4,903 kpa

(30 to 50 kg/cm

4,903 to 7,845 kpa

(50 to 80 kg/cm

If the fins are bent, straighten them with a screwdriver

Never apply water directly onto the electronic compo-

427 to711 psi)

711 to 1,138 psi)

Injection Distance

300 mm (11.811 in)

500 mm (19.685 in)