Toyota Tundra 2005 Service - Repair - Maintenance page 1987

SFI (2UZ−FE) − THROTTLE BODY
INSTALLATION
1. INSTALL THROTTLE BODY
(a) Install the throttle body with the nut and 3 bolts.
Torque: 14 N·m (143 kgf·cm, 10 ft·lbf)
B17469
(b) Connect the 2 water bypass hoses to the throttle body.
(c) Connect the throttle control connector.
2. INSTALL INTAKE AIR CONNECTOR
3. FILL WITH ENGINE COOLANT (See page CO−2)
4. START ENGINE AND CHECK FOR ENGINE COOLANT
LEAKS
5. INSTALL THROTTLE BODY COVER
B17470
SF−45
SF0P7−17