Toyota Tundra 2005 Service - Repair - Maintenance page 1961

Key
Keyway
"S" Mark
SST
Rib
Triangle Mark
"A" Mark
Tube Joint Clip
SFI (2UZ−FE)
B17551
Triangle Mark
B17552
"MAX." Mark
B17553
B17489
− FUEL PUMP
INSTALLATION
1. INSTALL FUEL PUMP ASSEMBLY
(a) Install a new gasket to the fuel tank.
(b) Install the fuel pump assembly to the fuel tank.
NOTICE:
Be careful not to bend the arm of the fuel sender gage.
(c) Align the keyway of the fuel suction tube support with the
key of the fuel suction plate No.1.
(d) Apply MP grease to the entire interior surface of the fuel
pump gage retainer.
(e) Align the triangle mark on new fuel pump gage retainer
with the "S" mark on the fuel tank while pushing down the
fuel suction tube, attach the fuel pump gage retainer.
(f) Rotate the fuel pump gage retainer by hand, then tighten
it one complete turn and half using SST. Triangle mark on
the fuel pump gage retainer must be positioned between
"A" and "MAX." indications on the fuel tank.
SST 09808−14020 (09808−01410, 09808−01420,
09808−01430)
NOTICE:
Do not use other tools in this operation. Damage to the fuel
pump gage retainer and the fuel tank may result.
HINT:
A rib on the fuel pump gage retainer can be fitted into a tip of
the SST.
2. CONNECT FUEL SUCTION TUBE
Connect the fuel pump tube and return tube to the fuel tank with
the tube joint clips.
SF−19
SF1XG−02